Wednesday, July 8, 2020

Power Control Strats

     General logic of the powertrain follows, if the supercapacitor has a voltage rating above the minimum operating value, it will be activated during the acceleration of high-power demand. The supercapacitor will handle regenerative braking unless the voltage rating is above the maximum voltage value. If the SoC reaches the lower value or during the normal driving period, the battery will activate to power the vehicle. During this time, the supercapacitor will be charged to the maximum level. This concept is similar to a parallel hybrid on petrol and battery power system. The vehicle cycle is divided into acceleration state, regenerative braking, and coasting state. For the control strategy to function, all power source requirements for driving phases are seen in equation 1.

                     P battery + P SC = P acceleration + P vehicle

A.    Coasting State

     The average vehicle power is in the range of coasting power consumption as power peaks are minimal. As a result, the supercapacitor is not in use as the battery can cover the traction load power. This means P acceleration and P SC are null. The battery pack that covers the power need is seen with equation 2.

                                     P battery = P vehicle

B.    Acceleration State

     During acceleration state, the power demand from the vehicle is high. This means the supercapacitor will be used to power the vehicle during acceleration unless the supercapacitor voltage is below its minimal threshold value. This is seen with equation 3.

              P SC = P acceleration + P vehicle, ∀ V SC ⩾ V SC Min

C.    Regenerative Braking State

     The supercapacitor will receive all power from the braking. The supercapacitor will handle regenerative braking unless the supercapacitor voltage is above its maximal threshold value. The power profile is seen with equation 4.

                        P vehicle = P SC, ∀ V SC ⩽ V SC Max

     The supercapacitor will charge during braking unless the voltage reaches the maximum SC operating voltage. During this scenario, the supercapacitor voltage will match its maximum rating and the power will transfer to the battery pack, which is shown in equation 5.

                         P vehicle = P bat, ∀ V SC = V SC Max

No comments:

Post a Comment

2nd Generation EV

     A Control board was developed for testing the power load draw of the vehicle. The basic component of the board consists of a motor cont...