Wednesday, July 15, 2020

Fuzzy Build

     The vehicle power rating is dynamic due to vehicle weight and must be calculated during acceleration. To predict I vehicle, the fuzzy logic rule-based algorithm is used. Based on the peak current rating and the current slope, the algorithm will determine the current threshold. The general rule of the fuzzy logic is shown below.

1.    Heavier vehicles consist of higher peak current.

2.    Faster accelerations result in higher peak current.

3.    Faster accelerations result in higher current slope.   

     The reason why current threshold values cannot be determined from the peak current itself is due to the acceleration profile. In comparison, a lighter vehicle with faster acceleration can have the same peak current as a heavy vehicle with lower acceleration. By introducing the current slope, which looks at the difference in the current value over a certain period of time, the fuzzy logic value will be closer to the average vehicle current rating.



No comments:

Post a Comment

2nd Generation EV

     A Control board was developed for testing the power load draw of the vehicle. The basic component of the board consists of a motor cont...