The battery and the supercapacitor is connected in series to powers the DC motor. The motor voltage is the combined voltage value from the two power sources. During acceleration, the motor voltage decrease as supercapacitor discharges. This is not preferred in the powertrain design as motor controller is simpler to program with constant input voltage.
PWM and a second path for the supercapacitor to power the motor when PWM is off should be added. This configuration also requires a diode, which prevents the battery from short circuiting. The PWM controls the amount of battery voltage to the system, which means as the supercapacitor voltage decreases, the PWM pulse rate can increase to achieve a constant voltage output to the DC motor. This design also allows for regenerative braking between the motor and the supercapacitor as the PWM can block battery connection. However, this design does not allow for a bypass of the supercapacitor, which is necessarily during normal driving phase as the supercapacitor is not in use.
Bypass is added in figure 3. The supercapacitor can perform power assistance during vehicle acceleration and supercapacitor retrieves all energy during regenerative braking. During normal driving phase, the battery is the sole powering source and the supercapacitor is inactive.
No comments:
Post a Comment